MODELS & SPECIFICATIONS

Our entry level horsebox is designed and built using the same high-quality materials and the same exacting standards as all our horseboxes. Just because it’s our most economic horsebox doesn’t mean we make any compromises. The Daily’s body is a rear facing horsebox and has no internal wall that results is a large internal space that can be configured to your needs. The Daily can be mounted onto a new or used chassis. Standard body length is 3.6m long from bulkhead to rear wall which and can be extended by 0.45m or 0.7m.

Body Shell
GRP pod above cab with large storage area
Reinforced structural bulkhead
Aluminium floor, base frame and sills
GRP body panels
Windows - One medium opening window with bite bars to nearside and offside
Insulated roof with single roof light/vent
Steel ramp frame
Gas assisted side ramp and flap with flap up warning buzzer
Wide rear door with window
Rear step

Horse Stall
Full width alloy breast bar
Hinged alloy lightweight  horse stall door with PVC kick strip
Stockboard wall protection to rear and side stall walls
Heavy duty rubber flooring throughout with rubber anti-slip surface to ramp
Internal LED lighting
4 internal tie rings
2 internal hay hooks
2 external tie rings on offside
Saddle rack and bridle hooks
Whip rack

Paint Finish & Graphics
Single solid colour to cab and body
“HORSES” decals to front and rear

General
LED external light set
Tyre Pressure Monitoring System
Wheel trims
Spare wheel

The Classic is a rear facing horsebox and our most popular model. It has all the features of the Daily but benefits from a full height internal wall with wide double doors. This not only creates a separate groom area at the rear but also a rear exit for the horse in case of emergency. The groom area is fitted out with two double bench seats with underneath storage. As with all our horsebox’s it can be configured to meet your own needs. The Classic can be mounted onto a new or used chassis. Standard body length is 3.6m long from bulkhead to rear wall with a 0.8m long groom area that and can be extended by 0.45m or 0.7m.

Body Shell
GRP pod above cab with large storage area and mesh cover
Reinforced structural bulkhead with viewing window
Aluminium floor, base frame and sills
GRP body panels
Windows – Horse area; 1 small opening window and 1 medium window opening with bite bars to offside, 1 medium opening window with bite bars to nearside
Insulated roof with single roof light/vent
Full height internal diving wall with wide double doors
Steel ramp frame
Gas assisted side ramp and flap with flap up warning buzzer
Wide rear door with window
Rear step

Horse Stall
Full width alloy breast bar
Hinged alloy lightweight horse stall door with PVC kick strip
Stockboard wall protection to rear and side stall walls
Single tack locker with external door and twin saddle racks and bridle hooks to nearside
Heavy duty rubber flooring throughout with rubber anti-slip surface to ramp
Internal LED lighting
6 internal tie rings
2 internal hay hooks
2 external tie rings on offside
Whip rack

Grooms Area
Vinyl flooring
Double bench seat with leatherette cushion and underneath storage to nearside and offside
Double saddle rack and bridle hooks

Paint Finish & Graphics
Single solid colour to cab and body
“HORSES” decals to front and rear

General
LED external light set
Tyre Pressure Monitoring System
Wheel trims
Spare wheel

The Vogue is a rear facing horsebox based on the Classic but it benefits from a high specification fit out. We’ve included lightweight body panels to help manage payload, tack lockers in the horse area and wardrobe/boot locker in the groom area. The Vogue can be mounted onto a new or used chassis. Standard body length is 3.6m long from bulkhead to rear wall with a 0.8m long groom area that and can be extended by 0.45m or 0.7m.

Body Shell
GRP pod above cab with large storage area and lockable cover
Reinforced structural bulkhead with viewing window
Aluminium floor, base frame and sills
Lightweight composite body panels
Windows - Horse area; 2 small opening windows, 1 medium opening window with bite bars with to nearside and offside. Groom area - 1 medium opening window to nearside and offside
Insulated roof with two roof lights/vents
Full height internal diving wall with wide double doors
Stainless steel ramp frame
Gas assisted side ramp and flap with flap up warning buzzer
Wide rear door with window
Rear step

Horse Stall
Full width alloy breast bar
Hinged alloy lightweight horse stall door with PVC kick strip
Stockboard wall protection to rear and side stall walls
Single tack locker with external door and twin saddle racks and bridle hooks to nearside and offside
Heavy duty rubber flooring throughout with rubber anti-slip surface to ramp
Internal LED lighting with red LED travelling lights
6 internal tie rings
2 internal hay hooks
2 external tie rings on offside
Whip rack

Grooms Area
Vinyl flooring
Double bench seat with leatherette cushion and underneath storage
Full height wardrobe with coat rail and boot locker

Paint Finish & Graphics
Single solid colour to cab and body
“HORSES” decals to front and rear

General
LED external light set
Horse and reverse cameras with LCD screen in cab
Reversing sensors
Tyre Pressure Monitoring System
Wheel trims
Spare wheel

The Transporter model is aimed at the needs of the Equine Transportation market. It benefits from lightweight body panels and is fitted out with our stallion stall. This includes a heavy-duty tall stall partition, single centre pole with breast chains and full height sniffer board/bite guard. The Transporter can be mounted onto a new or used chassis. Standard body length is 3.6m long from bulkhead to rear wall with a 0.8m long groom area that and can be extended by 0.45m or 0.7m.

Body Shell
GRP pod above cab with large storage area and mesh cover
Reinforced structural bulkhead with viewing window
Aluminium floor, base frame and sills
Lightweight composite body panels
Windows - Horse area; 1 small opening window and 1 medium opening window with bite bars with to nearside and offside. Groom area - 1 medium opening window to nearside and offside
Insulated roof with two roof lights/vents
Full height internal diving wall with wide double doors
Steel ramp frame
Gas assisted side ramp and flap with flap up warning buzzer
Wide rear door with window
Rear step

Horse Stall
Centre pole with breast chains
Full height sniffer board/bite guard
Hinged lightweight alloy heavy duty stallion horse stall door
Stockboard wall protection to rear and side stall walls
Heavy duty rubber flooring throughout with rubber anti-slip surface to ramp
Internal LED lighting
6 internal tie rings
2 internal hay hooks
2 external tie rings on offside

Grooms Area
Vinyl flooring
Double bench seat with leatherette cushion and underneath storage
Two double saddle rack and bridle hooks

Paint Finish & Graphics
Single solid colour to cab and body
“HORSES” decals to front and rear

General
LED external light set
Tyre Pressure Monitoring System
Wheel trims
Spare wheel

Horse Area

• 2 Horse, rear facing
• 3 piece aluminium Flooring
• Reinforced bulkhead with anti kick bar and viewing window
• Large storage space to luton with door
• LED lighting X2
• 10mm 1 piece rubber matting
• Sliding Aluminium light weight swan neck horse stall (Can be locked 3 central, up against wall and against ramp)
• Aluminium collapsible breast bar in between tack lockers (Lock 3 central and against grooms door)
• Tie hooks X4
• Hay Hooks X2
• X2 Medium opening windows with bite bars
• X1 Small opening window O/S
• X2 sky light (Opening handle)
• Insulated ceiling (Full length of vehicle)
• Full wall with Double grooms door lockable (Emergency horse rear exit)
• Ramp situated N/S (aluminium top flap and aluminium ramp with single piece grip fast rubber both gas assisted)
• Galvanised steel strengthening bar to O/S panel
• Horse area camera

Grooms area (Large)

• Larger rear entrance door with window
• X1 Bench seat with back rests (Leatherette) which converts to small double bed (5’11” long)
• Single hob and sink
• Fridge
• Underside cupboards (Carcases light grey)
• 240 hook up
• Vinyl flooring
• Whip rack
• LED lighting X4
• Wardrobe and boot locker flush doors
• X2 Large opening windows

Exterior and Construction

• Shaped new design Fibre glass pod and collars
• Fibreglass rear spoiler
• Lightweight Carbofont panels
• X1 external tack lockers N/S and O/S (Saddle racks and bridle hooks N/S and shelf O/S)
• Aluminium rear step
• Stainless steel Side frame
• X2 tie rings O/S
• LED side and rear Lighting
• Painted single colour metallic (Bumper included)
• Wheel Trims
• Reverse camera

Extras chosen with bundle price discount below.

• Padded horse stall and ceiling where horses heads are
• Recessed tie down strip X3 with rubber overlay
• Opening window in bulkhead
• Internal door O/S tack locker, X2 removable shelves, one above wheel arch and one 3/4 high.
• 240 hook up lead
• Saddle rack 250mm from rubber seal
• X3 blinds white surrounds, light grey pull down
• Bonded glass windows
• Horse wash with 105 litre tank
• Overhead cupboards N/S and O/S
• Sky light in grooms area
• Vinyl padded sealing
• Triple hob
• Separate sink
• Colour coded doors Dark wine red
• Leathers eats new design quilted, St James red, in cab, light grey stitching, velvet / suaede on small area of new design.
• Leather seats in grooms area, shaped and quilted in St James red, Light grey stitching
• 200mm high splash back same as weekender viewed
• 2 colour metallic paint work with glass laquer
• 3rd colour in decal
• X2 centre roof lights in grooms area

The Eventer is a rear facing horsebox designed to create a comfortable living/sleeping area for those who are staying away for extended periods. The horsebox is built on a new Al-Ko or LCVT chassis that is extended to provide a 2.1m long living/sleeping area which has toilet and shower cubicles as well as kitchen facilities.

Body Shell
GRP pod above cab with large storage area and lockable cover
Reinforced structural bulkhead with viewing window
Aluminium floor, base frame and sills
Lightweight composite body panels
Bonded windows - Horse area; 2 small opening windows and 1 medium opening window with bite bars, all with glass infill pieces to nearside and offside. Groom area; 1 large opening window to nearside and offside
Insulated roof with two manual roof light/vent and one automatic roof light/vent
Full height internal dividing wall with wide double doors
Stainless steel ramp frame
Gas assisted side ramp and flap with flap up warning buzzer
Wide rear door with window
Rear step

Horse Stall
Ramp side loading gates
Double sprung centre poles with full height infill panel/sniffer board and breast chains
Hinged alloy lightweight horse stall door with PVC kick strip
Stockboard wall protection to all walls
Stall padding
Heavy duty rubber flooring throughout with rubber anti-slip surface to ramp
Internal LED lighting
6 internal tie rings
2 internal hay hooks
2 external tie rings on offside
Single tack locker on nearside with external door and saddle racks and bridle hooks
Single tack locker on offside with external door
Whip rack

Grooms Area
Vinyl flooring
Windows blinds to windows in groom area
Full height wardrobe/boot locker
Half height cupboard
Fridge
Stainless steel worksurface with hob and sink
Heating
Water heater
Water tank
TV and aerial
Overhead cupboards on both sides
Bench seat in leather that converts into pull out bed and underneath storage
Toilet and shower cubicles
Removable dining table
Tall mirror
Vinyl wrap to walls – choice of finish

Paint Finish & Graphics
Single solid colour to cab and body
“HORSES” decals to front and rear

General
Leather cab seats
Warm water horse wash
LED external light set
240 volt AC hook up with pop up socket
12 volt accessory sockets
Portable generator
Leisure high capacity battery and inverter for 240 volt AC supply
Battery isolator
Battery guard/saver
Reverse and horse camera with LCD screen
Reverse sensors
Tyre Pressure Monitoring System
Wheel trims
Spare wheel